100W 30-512MHz High Power GaN RF Power Amplifier UHF VHF Wideband Broadband Dds SDR Amplifier Module Drone Jammer Module for Anti Drone System

Product Description

Product Description

The DW-UWB-0.03-0.512G-A-100W is a highly reliable amplifier.It employs ultra-wideband GaN transistors that can output 100 watts of power within

the 30MHz to 512MHz frequency range while maintaining relevant RF performance.In contrast to traditional CW amplifiers,this  amplifier  can  amplify  spread-spectrum signals,with an instant bandwidth of up to 200 MHz. When paired with the appropriate SDR digital excitation source,it can produce excellent interference effects on remote control,data transmission,and positioning signals.Therefore,this amplifier is particularly   suitable   for   use   in   wireless    communication interference systems in the V and U bands,including but not limited to mobile phones,radiio stations,and drones.

 

Applicaton and Feature

    1. Utilizing third-generation GaN transistors

    2. Ultra-wide working bandwidth and instant bandwidth

    3. Excellent reliability

    4.Features temperature detection,standing-wave detection,and protection functions

    5. RS485 serial interface for monitoring and control 

1.Electrical Specifications
Parameter	Min	Typ	Max	Unit	Test Condition
Operating frequency	30		512	MHz
Instant bandwidth			200	MHz	Broadband signal,such as OFDMsignal
Output power(Psat)	80	100		W	CWsignal
Gain(small signal)	41		51	dB	Measured with VNA in sweptfrequency mode at-20dBm. Input power calibrated/measuredat the amplifierinputport.
Gain flatness(small signal)	-4		4	dB	Test condition the sameasGain
Gain adjustmentrange	20			dB	Test condition the sameasGain
InputRFpower range	0		8	dBm
Gain adjustment step size	0.5			dB	Test condition the sameasGain
Noise figure			20	dB
Input VSWR			1.8		Measured with VNA in sweptfrequency mode at-20dBm. Input power calibrated/measuredat the amplifierinputport.
Spurious		-60		dBc	CW signal at theoutputpowerof100W. Spurious defined asany non-harmonic amplifier outpur. Spuriousmeasured in a1kHz resolution bandwidth,10kHz video bandwidth.Specifications apply at offsets of greater than or equal to±10kHz from theRF carrier. Maximum measurement frequency is8GHz
Harmonics(2nd, 3nd)	-10			dBc	CW signal source atoutputpowerof100W
Operating voltage	24	28	32	V	Note:Output power capabilities andgain will vary withvoltage
Operating current		14.5	18	A	CW signal source atoutputpowerof100W
PAEnable/Disable time			10	μs	Measurement with of100W CW output.Rise and fall time of amplifieroutput envelope recorded.Rise and fall times at10%-90% of the output power in linearscale.PAEnable/ Disable signal set to10kHzrepetitionrate and 50%dutycycle
Environmental Specifications
Parameter	Min	Typ	Max	Unit
Operating temperature	-40		+60	℃
Storage temperature	-55		+85	℃
RelativeHumidity (non-condensing)			+95	%
Altitude	MIL-STD-810FMethod 500.4
Vibration/Shock	PassMIL-STD-810F -Method 514.5/516.5 – ProcI

3. Alarm andProtection
Parameter	Introductions
Over temperature	When the temperature exceeds 80℃±5℃,theamplifier PIN12 willoutputs +5V voltage and the amplifier will automatically shut down; When the temperature drops below 70℃±5℃, the amplifierwill automatically turn on.
Over VSWR	When the output port of the amplifier is openor short,theamplifier PIN13 will outputs +5V voltage and the amplifier shut down,the statuswillbelocked. The alarm state willbe cleared once pin6 transmitsapulsesignal
Over voltage	The amplifier PIN2 will outputs +5V voltage andtheamplifier shutdown when the voltage exceeds 32V,the status will belocked. The alarm state willbe cleared once pin6 transmitsapulsesignal
Over current	The amplifier PIN3 will outputs +5V voltage andtheamplifier shutdown when the current exceeds 20A.,the status will belocked. The alarm state willbe cleared once pin6 transmitsapulsesignal

4. Mechanical Specifications
PIN#	Description	Specification
GroundingPost	GND	GroundReturn
Pull-core Capacitance	VDD	Supply Voltage:+24V~32V,+28VNominal
1	RS485(-) [note1][note2]	Serial CommunicationBus
2	VoltageAlarm	Alarm(5V), the amplifier shut down when the voltage exceeds32V,the status will belocked.
3	Current Alarm	Alarm(5V), the amplifier shut down when the current exceeds20A.,the status will belocked.
5	Attenuatorsetting	Voltageinput in the range of0.5-3.0VDC,0.5VDC corresponds with minimum attenuation, 3.0VDC ismaximumattenuation.
6	AlarmReset	If the alarm has been triggered,input an extermal pulse singaltoresetit (0V ~ 0.7Vis thelowlevel,3.3V~5Vis thehigh level)
7	Pr	Reversed RFPowerIndicator (0~3V)
8	RS485(+) [note1][note2]	Serial CommunicationBus
10	Pf	Forward RFPowerIndicator (0~3V)
11	PAEN	PA on:0V ~0.7Vor theHanding PA off:Inout 3.3V~5V
12	TA	Alarm(5V), when the temperature exceeds 80℃±5℃ andthe amplifier shutdown
13	VA	Alarm(5V), When the output port of the amplifier is openorshort, the amplifier will shutdown.
14	Tc	Analog voltagerelative toUnit’s Temperature @10mV/℃(0.50Voffset); (Vmeausred-0.50)/0.01=X℃, Example: (1.00V-0.50)/0.01= 50℃
4,9,15	NC
8	PAEN	PA on:0V ~0.7Vor theHanding PA off:Inout 3.3V~5V
9	NotUsed	No Connection

Zhuhai Dewin Communication Technology Co., Ltd is established in 2018. It is a leading provider of RF microwave power ampli-fer.signal jamming. drone jammer.drone detector, and other RF components. Our products incorporate LDMOS,GaN.LORA andDigital VCO technology.which are designed to meet the diverse needs of our clients. The products we offer cover a frequencyrange of 100-18000MHz,with power levels ranging from 10W to 200W,with the operating temperature range of -40 °C ~+85°C. Each module we provide has undergone aging testing. meanwhile our modules are characterized by their small size, highefficiency,good stability, and excellent consistency.

We can offer very competitive prices and high-quality services.With a strong focus on innovation and quality.we have earned areputation for delivering reliable and effcient solutions to customers wordwide.We have a professional and experienced R&Dteam,OEM or ODM projects that we can accept.

Our products are widely used in various fields,such as Airport, Public security, National grid.,Oil depot, Mine , Key areadefense.,etc We welcome inquiries from potential customers and partners,and look forward to establishing long-term and mutu-ally beneficial relationships. For more information about our products and services. please visit our website or contact us directy

01 Main business
We are a professional manufacturer and exporter integrating research, development, production andinternational trade.

We own independent factories, advanced production equipment and strict quality control systems.

We provide one-stop services including product design, customized production, quality inspectionand global shipping for worldwide clients.

Domestic sales account for 70% of total revenue, while overseas business takes up 30%. Our keyoverseas markets cover Europe, Southeast Asia and East Asia.

02 Main products
Our main products include anti-drone systems, drone detection systems, RF power amplifier, andantennas.

Our products are widely used in various fields,such as Airport, Public security,National grid.,Oildepot,Mine, Key area defense,etc.

03 Production capacity
We have a total of 3 production lines, 2 assembly lines and 1 debugging and testing line. The monthlyproduction capacity of power amplifier modules is 15,000 pieces. The monthly production of finishedequipment assembly products is 400 units.

Small-batch regular orders are delivered within 3 to 5 days, and batch orders are delivered within 15 days.

04 Quality control
We have professional testing equipment.such as spectrum analyzer,signal analyzer,RF power meter,-network analyzer and ect.

We also have product signal shielding aging chambers,all products are aged for 2 to 3 hours and 100%are tested before being shipped. The quality has received very favorable comments from my clients.

FAQ

Q1: Are you a factory or trading company?
A1: We are a factory ,our factory locates in Jinwan District,Zhuhai,Guag-ndong.Welcome to visit us.

Q2: How about the Shipping Method?
A2: DHL/UPS/TNT/Fedex and other air shipments and sea shipments areall workable. In one words, we could do any shipments you wanted.

Q3: How about the delivery date?
A3: In General, the delivery date will be 5-7 working days for normal buyquantity. But if bigger order, please check us further.

Q4: How about the label and the logo?
A4: Customize label and logo is workable.

Q5: How about the MOQ?
A5: 1 to 20 pcs according to different product.

Q6: How to do if the product i received is defective?
A6: Our strict quality control ensures 100% pass rate. But it can be dam-aged in the way. Please kindly share the defective product photo or video tolet us know where the problem is. We will make the compensation according-ly or send you a part or product.